JRSVHSP4-FF 4ft Jean's Shallow Front Vent Hood with Exhaust Fan and Flashing

SKU
54290

Call an Expert for Ventilation Advice

361-259-9703

In stock
SHIPS IN 1-3 BUSINESS DAYS
Price : $2,595.00 /ea

Images shown may not be an exact representation of the product.

Product Description

Vent Hood Kit: JRSVHSP4-FF

  • Our exclusive JRSVHSP Shallow Front is NSF Listed and meets NFPA 96 requirements for its safe and efficient design.
  • Handcrafted with 100% commercial-grade stainless steel construction, , the JRSVH includes all-stainless steel welds for no-seem and liquid tight joints. Our superior design and materials are unlike our factory-assembly competitors who typically offer lower grade materials which are susceptible to rust. They offer stainless steel only in the "exposed" areas the equipment. Our hoods are built to last and stand up to daily restaurant cleaning procedures.
  • Our low production costs allow us to offer our superior JRSVH at a very reasonable price point for our customers.
  • Standard Exhaust Hood Packages of 4, 5, 6, 7, 8, 9, and 10ft are in-stock and ready-to-ship in 24-48 business hours.
  • Our baffle grease filters have a larger surface area (20" X 16") to condense vapor and moisture and increase centrifugal separation which significantly improves efficiency
  • We proudly offer custom hood system fabrication for non-standard kitchen layouts. Our master fabricators will construct custom hoods to run safely and efficiently in all spaces ranging from smaller single-chef kitchens as well as expansive multi-station kitchens.

Exhaust Fan: CaptiveAire DU85HFA

Centrifugal upblast kitchen exhaust fans are designed to remove foul air, smoke, fumes, odor, and grease laden vapors from indoor environments. These cooking exhaust fans have an upblast discharge, which will expel the stale air away from the roof surface or building walls. Commercial exhaust fans are necessary for an optimal indoor environment.

  • Heavy duty construction, durable and weather resistant
  • Completely enclosed drive compartment protects motor from airborne contaminants
  • Non-overloading backward inclined wheels, blades and inlets fabricated from 3003-h34 aluminum
  • Forced fresh air through the motor compartment cools motor and ensures long motor life
  • Quick release latches allow for easy access to motor compartment
  • Variable Speed Control on Single Phase Units Only. (VFDs required to adjust speed for 3 phase versions)
  • High efficiency combined with low tip speeds result in quiet operation
  • Standard emergency disconnect switch

Roof or Wall Curb Flashings for exhaust and make-up air fans

Roof curb flashing is used as roof support structures for fans. Careful consideration goes into choosing the correct vent hood system components. The same consideration should also be taken for the penetration points on your roof and the type of roof curb flashing used. As part of our JRSVH Packages, we proudly include our JRS Roof Curb Flashing available in standard and custom sizes.

  • Constructed of 20 gauge galvanized steel
  • Size measurement: Sized to fit exhaust fan bases
  • Flat roof curb included
    • Pitched roof fitting is available for an additional cost of $175
    • Wall mount curb is available for an additional cost of $150

Includes:

  • JRSVHSP4 Type I Commercial Grease Vent Hood - 48" W x 48" D x 12" H @ hood front / 24" @ hood back
    • Baffle filters
    • Stainless steel grease cup
    • Pre-wired light(s)
    • Hanging brackets
  • Exhaust Fan: CaptiveAire DU30HFA
  • Flat Roof Curb Flashing (Wall and Pitch Roof Curb "Not Include" options are available)
 
Specifications
More Information
Sold By 1/Each
Resources

JRSVHSP Spec Sheet
CaptiveAire DU-HF Spec Sheet

Manufacturer Jean's RS
Model No. JRSVHSP4-FF
Width 48"
Depth 48"
Height 12"Frt - 24"Bck
Type Shallow
Includes

(1) CaptiveAire DU85HFA
(1) Flat Roof Flashing

Material Stainless Steel
NSF Listed Yes
USA Made Yes
Write Your Own Review
You're reviewing:JRSVHSP4-FF 4ft Jean's Shallow Front Vent Hood with Exhaust Fan and Flashing
Your Rating