Everpure’s MH-2 is a replacement water filet cartridge that is intended for coffee service filtration systems. Water flows into the top of the filter cartridge and into the filter chamber. A blend of activated carbon called Micro-Pure coats the filter membrane for the life of the filter. Incoming pressure forces the water through the Micro-Pure and through the filter membrane. Then, the filtered water travels through the filter membrane and out of the filtration system. This commercial water filter has a micron rating of .5, so it removes all particles that are .5 microns or larger. It has a capacity of 9,000 gallons and even utilizes AgION to prevent potential bacterial growth. The activated carbon that is on the filter membrane absorbs chlorine, bad tastes, and odors.
This Everpure replacement water filter is 20.75 inches in height and 3.25 inches in diameter. It is designed for chlorine reduction, cyst reduction, submicron particle reduction, and antimicrobial protection. The water filter cartridge also saves you energy by reducing scale build-up with the self-contained scale inhibitor. Coffee is 99% water, so this is the perfect water filter cartridge for high flow, higher volume coffee brewers that want clean, tasty, and safe coffee. It is really important that you change your water filter cartridge every 6 months or when the pressure falls below 10 psi. If the water filter is not changed when it is scheduled to be changed, dumping, clogging, or even channeling may occur. When replacing your water filter, allow a 2 1/2 inch clearance below for easy replacement and flush the new cartridge by running the water on full flow for three minutes. This Everpure water filet cartridge is NSF approved and is backed by a one year warranty covering defective materials and workmanship.
Come to Jean’s Restaurant Supply in Corpus Christi or McAllen and see our huge selection of water filtration systems for ice machines, coffee machines, fountain drink dispensers, and drinking water.