This replacement cartridge for a coffee filtration system is the Everpure BH-2. It has a capacity of 3,000 gallons or 6,000 pots, and is the perfect filter for low flow, medium volume coffee brewers. The measurements of this commercial water filter are 14.5 inches in height and 3.25 inches in diameter, and it has a micron rating of .5. This means that for the life of the water filter, all particles that are .5 microns or bigger are removed 99.9% of the time. There is AgION with antimicrobial protection in this water filter that inhibits bacterial growth. Because coffee is 99% water, this replacement filter features:
- chlorine reduction for taste and odor,
- scale inhibition,
- class 1 submicron particle reduction,
- antimicrobial protection, and
- cyst reduction.
The water flows into the filter cartridge, down the inlet tube, and into the filter chamber. The filter membrane in this ice machine filter is coated with Micro-Pure, which is a blend of active carbon. The Micro-pure coats the filter membrane for the life of the filter and it allows the water to flow evenly and freely though the filter. The water in the filtration system is pushed through the filter membrane and the Micro-pure by the incoming pressure, and the filtered water channels up through the filter membrane and out of the system. This water filter replacement is NSF approved and is backed by a one year warranty covering defective materials and workmanship from the date of purchase.
When installing your replacement cartridge for your coffee filtration system, leave a 2 1/2 inch clearance below the cartridge for ease of replacement, and flush the filter for three minutes with water that is on full flow. Also, change the filter every 6 months or when the pressure falls below 10 psi. If the filter is not changed when it should be, clogging, channeling, or dumping may occur.
Jean’s Restaurant Supply is your one stop shop for all your kitchen equipment, including replacement cartridges, ice making machines, ice machines, filter heads, and prefilters.