Reach-In Refrigerator, Stainless Steel Refrigerators, 3 Door Reach-In Cooler, Traulsen G30010

The G30010 is a Traulsen G-series refrigerator. It has three sections that each have their own solid door, and it requires a 115 volt, 1 phase, 15 amp dedicated outlet. This reach-in refrigerator is made from 20 gauge stainless steel on the exterior front, doors, and one-piece louver assembly, and the exterior sides, back, and bottom are heavy gauge aluminized steel. The sides, interior, and door liners are anodized aluminum, and it sits on 6 inch casters. Inside of this commercial refrigerator are three epoxy coated shelves in each section, which each have a holding capacity of 225 lbs. Each full width shelf is mounted onto shelf pins. The three doors have metal door pans to protect the gaskets and removable locks. The cam-lift glide hinges on the doors have a 120º stay open feature and each door has a recessed door handle. To ensure that the doors are tightly sealed, this stainless steel refrigerator has vinyl magnetic door gaskets, and behind each door opening is an anti-condensate heater. The cabinet and the doors are also foamed in place with CFC free, high density, polyurethane insulation, and this refrigerator has a holding capacity of 69 cubic feet.

A top mounted, self-contained, balanced refrigeration system is utilized in this food and beverage refrigerator. It uses CFC free R134A refrigerant to hold the temperature between 34ºF and 38ºF. This Traulsen refrigerator has a thermostatic expansion valve, an air-forced hermetic compressor, and an easy to clean front facing condenser. There is also a top mounted, non-electric condensate evaporator and a large, high humidity evaporator coil which is located outside of the food zone. For easy temperature control, a water resistant microprocessor control system comes standard with this commercial three door refrigerator, and this control system uses a three digit LED display and a Fahrenheit and Celsius temperature display. Don’t forget that the condenser gets dirty very quickly. You need to clean the condenser coil every thirty days with a stiff wire brush to lower electrical costs and minimize services expenses, because a dirty condenser can lead to compressor failure.

This commercial reach-in cooler is backed by a one year warranty covering parts and labor and a five year warranty covering the compressor. Options are available such as chrome plated shelves, extra epoxy coated shelves, or six inch adjustable legs. Hard water and food deposits are very bad for stainless steel and can cause rust and pitting. So, you should clean off the stainless steel often with a non-chloride cleaner and a soft cloth to help reduce the possibility of rust and pitting.

Visit us at Jean’s Restaurant Supply in Corpus Christi or McAllen to get the best deals on commercial reach-in refrigerators, electrical fryers, steam kettles, heated cabinets, buffet bars, and conveyor ovens.