The T-23 reach-in freezer is made with top of the line, high quality metals. This commercial freezer is 27 inches in length, 29 1/2 inches in depth, and 78 3/8 inches in height and has a holding capacity of 23 cubic feet. It comes with three PVC coated wire shelves that measure 22 7/8 inches in length and 23 1/4 inches in depth. Each shelf comes with four chrome plated shelf clips and these shelves are adjustable on 1/2 inch increments. The interior of this restaurant freezer is composed of white aluminum liner which is NSF approved. The doors and the entire cabinet structure are foamed in place using high density, CFC free, polyurethane insulation and the frame rail is fitted with 4 inch in diameter stem castors. The front of this true freezer, along with the grill and shroud, is made of 300 series stainless steel and the ends and back are made of anodized quality aluminum. The stainless steel is very high quality and it is important to keep it in top shape by cleaning it regularly with non-chlorine cleaners and a soft cloth, never a wire brush or steel pad. This will prevent scratches and the possibility of rust or pitting. Another thing that should be wiped down regularly is the handle of this commercial freezer. This recessed door handle is 12 inches long and also foamed-in-place with sheet metal interlock so that it is permanently attached. There is a lifetime guarantee on these door handles and also a lifetime guarantee in the door hinges, which have a torsion type closure system. The positive seal self-closing door has been tested over 1 million times in the factory to ensure optimal performance.
This upright freezer contains many exciting extras, such as an exterior mounted temperature monitor and rear airflow guards which prevent products from blocking the airflow. The evaporator, which is 20%-40% larger than industry standards, is epoxy coated to eliminate the potential of corrosion and this industrial freezer is NSF-7 compliant for open food containers. The T23 has a superior refrigeration system that uses R404A CFC free refrigerant and it contains an extra large evaporator coil and a large condenser that maintains a temperature of –10ºF. The sealed evaporator, fan motor, and large fan blades make temperature recovery faster and run times shorter, which is perfect for busy restaurants. The automatic, time-initiated defrost system saves energy and provides the shortest defrost cycle possible. This commercial freezer has a ½ horsepower and 10.4 amps with a crated weight of 295 pounds. It has a voltage of 115/60/1 and the 9 foot cord that is included with this freezer fits into a 5-15 phase NEMA configured outlet. The lighting on the interior of this restaurant freezer is incandescent and safety shielded. Optional features are also available, such as more shelves, additional door hinging, and full and half door bun tray racks. There is a one year warranty on all parts and labor and a five year warranty on the compressor. As always, don’t forget to clean your condenser coil and fan with a stiff bristle brush to minimize your service expense and lower electrical cost!
3-adjustable, heavy duty, vinyl coated wire shelves
Foamed-in-place polyurethane high density cell insulation (CFC free)
4'' diameter swivel castors
Lifetime guaranteed recessed door handles
|
Brand: |
True |
|
Weight: |
295 lbs |
|
Warranty: |
1 year parts & labor. 5 year compressor. |
|
Approvals: |
UL, NSF, CSA |
|
Capacity: |
23 cu ft |
|
Energy: |
1 year parts & labor. 5 year compressor. |
|
Dimensions: |
27'' L x 29-1/2'' D x 78-1/4'' H |
|
PDF: |
Specifications |