Outdoor Walk In Cooler 6' x 10' x 7'6'' Self Contained, Kolpak PX7-610-O

Kolpak’s PX7-610-O is an outdoor walk-in cooler that requires a 115 or 208-230 volt, 1 phase, 25 amp dedicated outlet. It is constructed from 26 gauge embossed galvalume on the interior and exterior and has one 26 inch by 78 inch door. This self-closing door in this commercial cooler has magnetic gaskets and cam-lift hinges. It is also equipped with a keyed door lock, a vapor-proof light switch, and a 2 1/2 inch dial thermometer. All the panels in this outdoor refrigerator are NSF approved and they utilize Posi-Loc locking assemblies to provide perfect alignment. For extra security and stability, the tongue and groove sectional panels interlock and the metal edges of the walls have double 90° bends. Another excellent feature in this walk-in refrigerator is the 4 inch thick, foamed in place, polyurethane insulation, which provides superior refrigeration efficiency. The gaskets on the interior and exterior tongue edge are foamed in place as well to prevent the gaskets from moving around.

This outdoor kitchen cooler measures as follows:

• 5 feet, 10 inches in length,
• 9 feet, 8 inches in width, and
• 7 feet, 6 inches in height.

This Kolpak commercial outdoor cooler is NSF, UL, and CSA approved and is backed by a one year warranty on parts and labor and a ten year warranty on the panels. It is a good idea to clean your walk-in refrigerator often to keep it in its excellent condition. The exterior and interior can be cleaned with water, a soft cloth, and mild soap, and fingerprints and stains can be removed with a mild, non-abrasive cleaner. The screws in the hinges and latch need to be tightened regularly and the door hinges should be re-lubricated every 2 months with petroleum jelly. Clean the gaskets as well, with a solution of baking soda and warm water, and replace broken gaskets immediately. Options are available with this industrial outdoor cooler including a walk-in floor, a side mounted refrigeration unit, fluorescent lights, bumper rails and door bumpers, or strip curtains. Custom walk-in coolers are available upon request.

Don’t worry about installing your commercial outdoor walk-in cooler, because it really is quite simple. Instillation requires the Kolpak outdoor package which is included. Also needed is a field supplied and installed condensate drain line. The roof sealing system is available upon request for your outdoor walk-in, and it is also recommended.

Shipping & Purchasing:

• We realize there are many factors to consider when purchasing a walk in cooler. To ensure your complete satisfaction on your investment we kindly ask that you contact us to complete your order. We will then verify that the walk-in is to your exact specifications and provide you a copy of the architectural shop drawings for the unit. These drawings are very critical when working with your contractor. Custom walk in cooler boxes are also available. Contact us if you cannot find what you need or if you have any questions. We will provide you with a freight quote before completing you order. 1-800-840-3610

Visit us at Jean's Restaurant Supply in one of our two locations and we will help you pick out the perfect outdoor walk-in cooler, indoor walk-in freezer, gas range, electric griddle, lava rock charbroiler, or convection oven.