Description
This indoor walk-in cooler is the Kolpak PX7-068. It requires a 115 or 208-230 volt, 1 phase, 25 amp dedicated outlet, is floorless, and has a holding capacity of 264 cubic feet. The exterior and interior of this commercial cooler are 26 gauge embossed galvalume and the whole cooler is foamed in place with CFC free polyurethane insulation. There is a 26 inch by 78 inch self closing door that has two strap-type, cam-lift hinges, a magnetic gasket, and a Poli-Seal door closure with a latch. Also included with the door of this walk-in refrigerator are provisions for locking and even an interior safety release to prevent getting locked inside. The door section has an incandescent type vapor-proof light switch to provide excellent visibility of your food products, and there is a 2 1/2 inch dial thermometer to easily adjust the temperature. Right or left door hinging is optional. For easy cleaning with your indoor walk-in, the corners of the floor panels are coved as well.
The tongue and groove sectional panels of this Kolpak walk-in cooler interlock to provide a durable and strong wall, and the PVC gaskets are on the edge of the tongue rail are foamed in place to ensure that the gaskets do not move out of place. For even more stability, there are double 90? bends on the metal edges of the wall. Featured in this indoor refrigerator are Posi-Locking assemblies for perfect alignment of the walls, ceilings, corner panels, and door frames, and the panels are all NSF approved.
The self-contained, top mounted refrigeration system of this commercial walk-in refrigerator holds the temperature at 38?F, and the condensing unit is air-cooled. Included is a high pressure safety control, an automatic condensate evaporator, an expansion valve system, and an off cycle coil defrost system with a defrost timer. In addition, the compressor is 3/4 horsepower. It is really important that you clean your cooler often and correctly to keep it running efficiently. The condenser coil and the fan blades should be cleaned every thirty days with a stiff wire brush, because a dirty condenser can lead to compressor failure but a clean condenser can lower electrical costs and minimize service expenses.
This Kolpak indoor walk-in cooler measures 5 feet, 10 inches in length, 7 feet, 9 inches in width, and 7 feet, 6 inches in height. It is backed by a one year warranty on parts and labor, a five year warranty on the compressor, and a ten year warranty on the panels. Many options are available including interior ramps, kick plates, low ambient controls, a walk-in floor, or tread plates. Custom walk-in coolers are available as well. Also, this restaurant walk-in cooler is NSF, UL, and CSA approved.
Instillation of this walk-in refrigerator is hassle free, and it does not even require a refrigeration technician, a plumber, or a drain line. The wall panels, corners, and door are assembled on the screed and the the ceiling panels are lifted into place. Then the refrigeration unit is rolled up, fitted into the correct ceiling panel, and bolted into place. After that, all you have to do is attach a pigtail and plug the cooler into the wall. It?s really that simple!
Shipping & Purchasing:
- This item qualifies for the 7 Day Quick Ship program which means this walk in is delivered to you after 7 days of receiving your order. We realize there are many factors to consider when purchasing a walk in cooler. To ensure your complete satisfaction on your investment we kindly ask that you contact us to complete your order. We will then verify that the walk-in is to your exact specifications and provide you a copy of the architectural shop drawings for the unit. These drawings are very critical when working with your contractor. Custom walk in cooler boxes are also available. Contact us if you cannot find what you need or if you have any questions. We will provide you with a freight quote before completing you order.
|
Brand: |
Kolpak |
|
Warranty: |
10 years on panels, 1 year parts and labor |
|
Approvals: |
UL, NSF, CSA |
|
Material: |
Galvalum Walls, Urethane Foam Insulation |
|
Energy: |
115v, 60Hz, 1 Phase, 19.8 Amps, 3/4 H.P. |
|
Capacity: |
264 Cubic Feet |
|
Dimensions: |
5' 10'' L x 7' 9'' W x 7' 6'' H (No Floor) |
|
Door Opening: |
26'' x 78'' |
|
Refrigeration: |
Self Contained, 38°F |
|
PDF: |
Specifications |
How Do You Ship My Order?
For items under 150 lbs we will ship using UPS. For all other items we will ship using a freight company of our choosing.
When Will My Order Arrive?
Normal delivery times for ground shipping and ground freight are from 2 to 8 business days and do not include weekends or holidays. Express delivery options are available during check out. Please be aware that it may take up to 48 hours to process your order before it leaves our warehouse. Transit times do not include order processing time. If you need a true overnight or expedited delivery you must contact us for a guaranteed delivery date. If the UPS rate is more than what was on your order you will be notified of the difference before the order is shipped out. Items cannot be sent out until the invoice is paid in full. We are not responsible for unforeseen transit delays
unless you book the shipment with us and we confirm the guaranteed delivery date back to you. All orders placed Friday after 12pm will be shipped the following Monday.
How Much Is Shipping?
Standard Ground Deliveries: We will ship all orders under 150 lbs using UPS. Rates provided by UPS depend on your zip code and the size and weight of the total delivery. UPS rates and all other standard ground rates provided are non negotiable. These rates will be provided for you during checkout after you have entered your shipment destination information. Large shipments and expedited shipments may incur higher charges than what was shown on your order. You will be notified to pay the difference before your order is shipped out. There is a minimum $5 handling fee for all orders shipping UPS.
Standard Freight Deliveries: We will ship all orders over 150 lbs via a 3rd party freight company. For the best rates possible, we recommend that you request a freight quote. By requesting a freight quote we will be able to provide you with a price tailored to your business address.
Here is a list of freight shipment options that are not included in a standard delivery or free delivery but are available at an additional charge:
- Residential Delivery - Additional charges will be applied if freight items are to be delivered to a non-commercial address. Orders that are tagged with free shipping but are going to a residential address will be held until the shipping rates are determined. Price will vary depending on the size and quantity of the shipment.
- Lift Gate - A hydraulic gate which brings your freight item down to curbside. This is needed to lower your freight package from the truck bed, to the ground in the event that no loading dock or fork lift is provided.
- Call Notification - Used when you want the delivery person to call you to let you know they are on their way.
- Inside Delivery - Additional charges are applied if you want the delivery person to physically bring the item into your business. This does not include installation or set up.
If you require any of these additional features you must contact us to first to confirm them. We will give you any adjusted shipping charges on your invoice prior to sending out your order. Freight deliveries are typically very heavy and large. Please make sure you have adequate personnel to unload and move your item on the day of delivery.
On orders of $350 or more: Tables, sinks, and furniture, as well as international orders, orders to Hawaii and Alaska, do not qualify for free shipping.
Where Do You Ship To?
We offer standard ground shipping and standard ground freight to the contiguous United States. Shipments to Alaska, Hawaii, Puerto Rico, Canada, Mexico and all other international deliveries must be scheduled with us via email or telephone. We are not responsible for any customs charges or brokerage fees incurred at the time of delivery for any international order. Orders placed through the website for locations outside the contiguous U.S. will be held until all shipping charges are cleared. This may increase the final total cost of your order. We will notify you of any additional charges before processing your order. We do not ship to P.O. or M.P.O. Boxes
Damaged Freight Policy
We take every effort to ensure our packages arrive to you, the customer, in excellent condition, but unfortunately packages can be lost or damaged during transit. To avoid damage/loss of items, follow this Receiving and Inspection Procedure.
1) At the time of arrival, count the number of packages and inspect the exterior of the packages for any hint of damage. If you suspect damage,
do not sign the freight bill receipt prior to an internal inspection. Note shortages and all damage on the freight bill receipt. If shortages and/or damages are not reported at the time of delivery, Jean’s Restaurant Supply cannot be held responsible.
- If pallet is damaged, cracked or broken or there are visible tears, puncture holes or foot prints, open package and inspect, especially beneath the item such as legs and under carriage where damage may occur, in order to avoid hidden or concealed damage.
- Do not be rushed (driver will not leave until you sign). If the driver rushes you it is more likely your items may have damage.
- If damage is extensive, please refuse it and contact Jean’s Restaurant Supply to send out a replacement.
- If damage is cosmetic and you choose to retain it, note it on the freight bill receipt, and contact the freight company to start the claim process. Then, contact Jean’s Restaurant Supply and notify us of the situation. We will assist you in that process.
2) Once you have received your items, unpack them immediately to ensure there is no hidden or concealed damage. If you find damage, do not discard any of the original packaging. Contact the freight company immediately and request an inspection within 5 days. Have your Freight Bill Receipt available with the tracking/pro number. If damage is discovered after driver has left – the customer is responsible for filing a claim and Jean’s Restaurant Supply will not be responsible for a refund or exchange of product.
If Jean’s Restaurant Supply has mistakenly shipped the wrong item or a defective item, contact Customer Service at 1-800-840-3610 in order to obtain a call tag and we will gladly ship out the correct item. If you have received a damaged item or refused it at time of delivery, a replacement unit can be sent out provided that the Receiving and Inspection Procedure was reasonably met. Jean’s has set this policy in place to protect you, the customer.