This 5 HP motor disposer is equipped with continuous duty rating and inherent overload protection in the motor. This Hobart disposer has heavy aluminum grind and discharge housings and also has eight bolts that fasten the motor unit to the grind chamber to permit easy removal. This Hobart disposer fastens to 7'' I.D. throat opening cones and a vinyl isolating ring eliminates metal-to-metal contact at the cone mounting which reduces vibration and noise transmission, The breaker blade is mounted at the center, speeds the grinding, and prevents any objects from ''riding'' at the center. The two hardened stainless steel cutter blocks are replaceable and can be indexed for new cutting edges. This disposers Ni-Resist flywheel is 9'' in diameter and the slots undercut the shredder ring to assure that particles are cut to the proper size before passing to the drain line. The motor shaft seal is a face-type seal that consists of sintered bronze mating rings and the spring loaded carbon ring insert in chemical resistant neoprene bellows. The mating surfaces are protected from grit or fibers by being recessed into the flywheel. If any moisture passes this seal, a flinger and drain tube is provided to insure immediate removal. The disposer flywheel operates in either direction and when installed, the flywheel automatically starts in the opposite direction each start.