This Hobart dishwasher has a capacity of 252 racks per hour and has a opti-rinse system. This fully automatic, high-temperature single-tank, rack-type dishwasher with flexible strip curtains at the ends of the chambers and between the prewash, wash and final rinse compartments. This unit has large inspection doors that are located in the front of the machine to provide access to the wash arms, rinse arms, rinse pan strainer, strainer baskets, front and rear strainers, and the pump intake screens. This dishwasher is designed to clean and sanitize with hot water 160 degrees wash and 180 degrees final rinse. The automatic interlocks shut off the pump and the conveyor if the door is opened while in operation and the fill is interrupted whenever a door is opened as well. This dishwasher comes equipped with a 2 horsepower wash motor, a 1 horsepower prewash motor, and a 1/6 horsepower gearmotor and all have manual overload protection. This CRS-76A Hobart dishwasher's prewash tank is equipped with an upper stainless steel wash arm with specially shaped nozzles that have large openings and are arranged to effectively scrap all types of tableware. The wash tank on this unit is equipped with upper and lower stainless steel wash arms with specially shaped nozzles that have large openings and are arranged to effectively direct the water jets to all ware surfaces. The upper and lower rinse arms have single rows of nozzles and the rinse is automatically activated by racks in bypassing. The final rinse line and the fill water line are equipped with a vacuum breaker on the downstream side of electrically operated solenoid valve in common piping system, for automatic maintenance of the tank level. The large bell-type automatic overflow and drain valve in the prewash tank are controlled from the inside of the machine. This dishwasher has a stainless steel control box with a power ''on/off'' and a ''start/stop'' switch that are mounted on the top of the machine and a pilot circuit is standard on this unit. This dishwashes tanks and chambers are constructed of #16 gauge stainless steel, arc-welded and unitized, welded stainless steel tank, frame and stainless steel legs. The chambers, control box, and front trim panels are a polished, satin finish.