This True TD-50-18 deep well horizontal bottle cooler is made with superior quality materials to provide a huge capacity using limited floor space. It is composed of a counter top and two lids that are stainless steel. The front and sides are of durable, heavy-duty, laminated black vinyl and a matching black aluminum back. Galvanized steel makes up the interior of the cabinet, which is foamed in place with high-density, polyurethane insulation that is CFC free and uses 1 3/4 inch sidewall. For protection against corrosion, the heavy gauge galvanized steel base rail is dipped in rust inhibiting enamel paint. This commercial beer cooler has a forced-air, positively guided air flow to cool the bottles on the top first and to insure a balanced temperature throughout the whole cabinet the extra large evaporator coil runs the whole length of the cooler. CFC free 134A refrigerant is used in the refrigeration system and the high horsepower compressor and large condenser keep the temperature between 33ºF and 38ºF. The self-lubricating, cast iron, epoxy coated evaporator fan motor, which has a life expectancy of 15-20 years, and the huge fan blades on this industrial cooler give a low velocity, high volume airflow that will lead you to quicker recovery times during high use situations. The condensing unit slides out from behind the front grill to easy cleaning too. Because condensers accumulate lots of dirt it is important to clean them every thirty days, along with the fan blades, with a stiff bristle brush. For coolers that are outside, it is also important to blow CO2 through the condenser from the fin side to the fan after doing this.
This industrial bottle cooler is 49 5/8 inches in length, 26 5/8 inches in depth, and 33 3/8 inches in height. 16 1/2 cases of 12 ounce bottles or 24 cases of 12 ounce cans can fit inside and there are three heavy duty PVC coated adjustable bin dividers that are each 10 millimeters thick. The center section of this beverage cooler uses one divider of a different size than the right and left section dividers. This restaurant beer cooler has a crated weight of 245 pounds, a 1/3 horsepower, 8.1 amps, and a voltage of 115/60/1. There is a 7 foot cord that is included at no extra cost which fits into a 5-15 phase NEMA configured outlet. A removable bottle cap opener and a cap catcher are also included for free and there are optional features that can be ordered as well. One optional accessory is 2 1/2 or 3 inch in diameter castors or ratchet locks. This restaurant beverage cooler is NSF-7 compliant for bottled and pre-packaged products.
Just a reminder: it is important to keep your stainless steel clean from hard water and food or drink deposits to protect it against rust and pitting. When cleaning the stainless steel on this reach in bottle cooler only use cleaning products that are non-chloride and be sure that they are free of quaternary salts. Also, always use a soft cloth and let the stainless steel air dry to maintain its regal appearance.
- Positive guided, forced air cooling - cools bottles on top first.
- Attractive, wear-resistant laminated heavy duty black vinyl exterior.
- All stainless steel counter top and lids.
- Interior - long lasting heavy duty galvanized steel. Over-sized
- Oversized, environmentally friendly (134A) refrigeration system. Provides ice cold products 32° to 38°F - very fast pull-down capacity.
- Huge capacity requires minimum floor space.
- Large evaporator coil virtually runs length of cooler for efficient balanced cooling.
- Foamed-in-place, high density polyurethane insulation (CFC Free).
- Bright fluorescent interior lighting for excellent visibility. Self-contained system.
- Heavy duty 10 mil thick pure grade vinyl coated adjustable bin dividers for maximum storage use.
- Rugged built-on removable bottle cap opener and cap catcher.
- Holds 18 cases/12oz bottles or 23 3/4 cases/12oz cans.
|
Brand: |
True |
|
Weight: |
258 lbs |
|
Warranty: |
1 year parts and labor. 5 year compressor. |
|
Approvals: |
NSF, UL |
|
Capacity: |
16.5 cases/12oz bottles or 24 cases/12oz cans |
|
Energy: |
115v, 60hz, 1 phase, 8.1 amps, 1/3 hp |
|
Dimensions: |
50'' L x 26-1/2'' D x 33-1/4'' H |
|
PDF: |
Specifications |